Products and materials
What are your card holders made of?
Other questions from internet users:
"What materials do you use?" / "Are your card holders made of metal or plastic?" / "What quality of leather is used?"
Each MONARQ card holder is crafted from precision-machined aluminum, a material renowned for its lightness and strength. This is then combined with carefully selected genuine leather, offering a natural texture and refined finish. These authentic materials ensure each piece remarkable durability and a unique character that only improves with age.
Do your cardholders offer RFID protection?
Other questions from internet users:
"How are my cards protected?" / "Is RFID really integrated?"
Yes, RFID protection is integrated across the entire range. The metallic architecture creates a physical barrier that limits unwanted contactless reading, reducing the risk of skimming on NFC-enabled cards. This protection activates passively, without batteries or settings, and does not affect the normal use of your cards when you intentionally take them out to pay.
In practice, the shielding significantly attenuates the high-frequency field of the readers, preventing coupling between the terminal's antenna and the card's antenna as long as the card remains inside the aluminum module. Cards placed outside the module (for example, in the leather sleeve) do not benefit from the same level of protection and must be removed for intentional reading.
What is the capacity of a MONARQ card holder?
Other questions from internet users:
"How are my cards protected?" / "Is RFID really integrated?"
Depending on the configuration, our card holders typically accommodate 9 to 16 cards by combining dedicated slots and a central module. They also feature a bill compartment and a discreet exterior slot for quick access. The ergonomic design maintains a manageable volume even when fully loaded, while preventing excessive friction. For optimal comfort, alternate engraved and blank cards and distribute them evenly without exceeding the recommended limit.
Are the leather, the mechanism, and the aluminum water-resistant?
Other questions from internet users: "Can I use my card holder in the rain?" / "Does water damage the leather?"
The materials easily withstand splashes and light rain. The aluminum won't rust, and the mechanism is designed for real-life conditions. The leather, on the other hand, is treated with a finish that helps repel water and stains, but it remains a natural material: avoid immersion or prolonged exposure to moisture. If it comes into contact with water, wipe it off and allow it to air dry, away from direct heat sources, to preserve the texture, color, and longevity of the piece.
Engineering and innovation
Is the ejection mechanism reliable?
Other questions from internet users:
"Does the button break easily?" / "Can the mechanism jam?"
The ejection mechanism is machined from aluminum and validated through thousands of cycles to guarantee consistent force and smooth card ejection. Tight manufacturing tolerances minimize play and premature wear. When used under recommended conditions (without overloading or liquids), it maintains its precision day after day. If dust accumulates, a simple blast of dry air is all it takes to restore smooth operation.
How does the ejection system work?
Other questions from internet users:
"Do the cards come out automatically?" / "Can only one be drawn at a time?"
A brief press on the lever fans out the cards for quick locating and retrieval. The expertly developed, all-metal mechanism combines a calibrated spring with internal guidance for smooth, jerk-free ejection. The cards glide effortlessly without unnecessary friction to protect the magnetic strips. You can remove a single card or several, without forcing. Each module is precision-engineered and tested through thousands of cycles to ensure smooth, quiet, and long-lasting operation.
Can I attach the card holder to my phone?
Other questions from internet users:
"Is it compatible with MagSafe?" / "How does it attach to the back of an iPhone?"
Yes, our models incorporate a magnetic system designed for secure attachment to the back of a smartphone, similar to MagSafe©-style solutions. The back of the aluminum module is magnetized, thanks to powerful integrated magnets. On a smooth surface and with a compatible case, the magnets provide a stable hold for everyday use (commuting, at the office, out and about). For optimal adhesion, ensure your case isn't too thick and avoid inserts that weaken the magnetic hold. These magnets are perfectly safe for your phone and won't damage electronic components or NFC chips.
Is the aluminum module detachable?
Other questions from internet users:
"Can I use just the metal part?" / "Does the core come out?"
Yes, the central aluminum module can be detached from the leather case for minimalist use or to attach it to your phone: a signature MONARQ feature. This modularity allows you to adapt your card holder to your needs: full for extended trips, or compact for maximum portability. The interlocking mechanism is designed to remain secure while maintaining a simple and clean removal action.
Manufacturing and assembly
Are your card holders handmade or factory-made?
Other questions from internet users:
"Are they handcrafted?" / "Do you use machines or just workshops?"
The manufacturing process combines precision engineering and handcraftsmanship. The aluminum modules are machined with accuracy to provide a smooth and durable surface. The expertly developed mechanism is finely tuned to ensure a smooth lever action and a clean, consistent card spread. Magnets are integrated into the back of the module for a secure attachment to the smartphone, while the sleeve remains flexible and responsive to movement.
On the leather side, each piece is precisely cut, trimmed, edge-dyed, then glued and hand-stitched. Hot stamping or engraving is carefully applied for a clean and lasting finish. Finally, a discreet protective coating, resistant to scratches and wear, is applied to preserve the leather's appearance, feel, and patina over time.
This blend of rigor and workshop techniques results in pieces that are durable, harmonious and pleasant to use.
What machines do you use for manufacturing?
Other questions from internet users:
"How is aluminum processed?" / "How do you work with aluminum?"
Our aluminum modules are machined using CNC (Computer Numerical Control) machines, guaranteeing precision to a tenth of a millimeter. This process ensures clean cuts, smooth edges, and perfect reproducibility from one piece to the next. Each block of aluminum is worked layer by layer until it reaches the final geometry of the module, before being finished by hand for an impeccable result.
How does the final assembly take place?
Other questions from internet users:
"What are the manufacturing steps before the product is finished?" / "How do you go from machining the parts to a complete card holder?"
The final assembly takes place in two stages. The aluminum module is first prepared separately: the lever, spring, and internal guide are integrated and precisely adjusted, then the magnet is installed on the back of the metal block. Simultaneously, the leather pouch is crafted separately: cut, checked, and sewn. The two parts are not glued: the aluminum module attaches to the pouch using an integrated magnetic system, designed to ensure a secure hold while allowing for easy removal when needed.
What is your quality control process?
Other questions from internet users:
"Is each part tested?" / "Do you double-check the products?"
Each card holder undergoes two separate quality control checks. The first is performed upon completion of manufacturing: verification of dimensions, surface finish, anodizing, engravings, and magnetic polarity. The second is carried out by us in Quebec, where each piece is manually inspected: ejection cycles of the mechanism, leather/aluminum alignment, magnetic strength, quality of stitching and edges, and complete absence of visual defects.
Only parts that strictly meet our quality tolerances are validated and packaged.
The interview
Can I polish my card holder?
Other questions from internet users:
"How do I condition the leather?" / "Should I apply a special cream?"
Our full-grain leather is already carefully treated to ensure excellent durability: it is naturally resistant and requires minimal maintenance. If necessary (dry climate, heavy use), you can simply nourish the surface with a leather cream or balm, applying a very thin layer only once or twice a year, after testing on an inconspicuous area. Avoid shoe polish, which is more pigmented and film-forming, as it can darken or clog the grain. Always work on clean, dry leather, applying thin coats with a soft cloth using circular motions; allow the product to penetrate, then buff lightly to maintain suppleness, protection, and a natural shine, without artificial highlighting or excessive shine.
How do I clean my card holder?
Other questions from internet users:
"What can I use to remove a stain?" / "Can I use soapy water?"
For leather, a soft, barely damp cloth is sufficient; avoid soap, solvents, and alcohol wipes. If there's a stain, start with a small, inconspicuous area and proceed without rubbing hard. For aluminum, use a clean microfiber cloth; for more stubborn marks, use a slightly damp cloth and then dry immediately. Never use abrasives: they dull the finish and cause unnecessary scratches.
How do I maintain the mechanism?
Other questions from internet users:
"Should I oil the lever?" / "How can I prevent it from seizing up?"
The MONARQ mechanism is made entirely of metal, unlike many models on the market that use fragile plastic parts. Its reliability stems from a precision-machined design, tested through thousands of cycles, guaranteeing smooth and consistent ejection without the need for lubrication. No special maintenance is required: simply keep it dry and, if it gets dusty, blow it off lightly to clear the passage. Thanks to its robust construction, you benefit from a durable system, designed to perform consistently year after year.
Will the leather change in appearance over time?
Other questions from internet users:
"Will the leather develop a patina?" / "Will my card holder stay the same?"
Our regular models receive a protective, scratch-resistant, and wear-resistant coating during the manufacturing process, specially developed for our leather. This discreet and invisible treatment enhances the leather's durability, preserving its original color longer and reducing maintenance. However, even with this protection, leather remains a noble and living material: it evolves with your daily use, gaining depth, softness, and a subtle sheen to reflect your personal style. On certain limited or rarer editions, we intentionally choose not to apply this protective coating to allow the leather to express itself more freely. This natural evolution, sought after by connoisseurs of fine leather, gives each piece a unique patina and a distinctive character, making your MONARQ an even more personal and exclusive object.
How can I protect my card holder from scratches?
Other questions from internet users:
"Will the aluminum scratch?" / "Can I apply a protective product?"
Anodized aluminum is highly resistant to wear, but like any metal, it may show minor signs of use over time. Leather, on the other hand, is protected by a finishing layer that minimizes micro-scratches. We recommend storing your MONARQ separately from keys or abrasive objects and cleaning it regularly with a soft microfiber cloth to maintain its shine.
MONARQ Services
How can I contact MONARQ?
Other questions from internet users:
"Where can I find more information about MONARQ?" / "Can I contact MONARQ by email?"
You can contact us directly using the contact form available on our official website, or by email at our dedicated customer service address. Our team responds quickly to all your inquiries, whether it's a question about a product, order tracking, or care advice. Every message is handled with care, because we want to offer everyone support that matches the quality of our creations.
❯ contact form
Do you offer after-sales service?
Other questions from internet users:
"What should I do if I have a problem?" / "Do you repair your products?"
Yes. Every product is guaranteed against manufacturing defects, and we go further with ongoing support to extend the life of your MONARQ. If needed, contact us with your order number and some photos/videos: our team will assess the situation and offer the most suitable solution; maintenance advice, mechanism adjustment, replacement of a part (magnet, screws, module), or exchange when necessary. We favor a repair approach whenever possible, as it is both more durable and faster. Depending on the situation, we will guide you through the secure shipping of the part and provide you with estimated processing times to minimize your downtime.
Can I give a MONARQ card holder as a gift?
Other questions from internet users:
"Is there gift wrapping available?" / "Can it be personalized?"
All our card holders come in a luxuriously finished, rigid box, carefully designed for gifting without the need for any additional packaging. Some limited-edition models may be offered with exclusive options, such as personalized engraving of initials or discreet markings, transforming your gift into a truly unique piece. This exclusivity lends an exceptional character to the experience, underscoring the selective and prestigious spirit of Maison MONARQ.